Emerald ring made in 18K yellow gold with an emerald-cut 2.95 ct. center stone and around 1/5 ct. of (G-H-I/VS) emerald-cut diamond side stones.
Precious engagement ring made in platinum and 18K yellow gold with a 52 pt. center diamond and 1.43 ct. of side stones. 0.52 ct. GIA certified center stone (H/SI-2). 1.95 ct. total weight of diamonds.
Set of 3 rings. 18K yellow gold center ring with platinum inlay and 30 pt. different colored diamonds; palladium with 8 pt. diamond and sapphire center stone on the other rings. Available in different widths, metal combinations, and diamond options.
Wedding band in 18K yellow and rose gold and platinum with different colored diamonds. 8.5mm.
14K white and 18K yellow gold ring with approximately ¼ ct. of white, yellow, champagne and blue diamonds halfway around. 4.5mm wide. Available in different metal and gemstone combinations and with 18K yellow gold and diamond outside rings.
Floral men’s wedding band custom designed to mirror his wife’s sculpted leaf wedding set, made in 18K yellow gold with a polished surface and intaglio brushed finishing. 5mm wide.
Commission mixed metal wedding band with polished platinum edges and diamonds set all the way around in satin finished 18K yellow gold. 2.5mm wide.
Commission commitment ring made in a combination of platinum and 18K yellow gold with Yogo sapphires and different colors of diamonds. 9.8mm wide.
Commission wedding band made with Chatham lab made emerald baguettes and round brilliant-cut lab diamonds in 18K gold prong settings. Over 1 ct. total weight of gemstones. 3mm wide.
Custom heirloom wedding set created with an engagement ring with center diamond and princess-cut sapphires from family jewelry, and curved wedding band made in 14K yellow gold with brilliant-cut diamonds and round sapphire side stones.
Commission platinum wedding ring designed with Diamond Head Volcano in Honolulu engraved on one side, with water texture flowing in the background, and the Washington, DC skyline engraved on the other side.
Textured ring with open spaces, made in 14K white gold with ¼ ct. of diamonds. 3.2mm wide.
Custom wedding band made by melting down original wedding ring, and making new design based on the original one with an engraved leaf and vine motif.
18K yellow gold and platinum ring made with 1.63 ct. total weight of raw and polished diamonds. Version in stock with a 0.60 ct. (G/VS-1) GIA certified center diamond. 9.8mm wide.
Timeless wedding set made in 18K yellow gold. Engagement ring designed using a stunning 1 ct. pear-shaped ruby center stone and ¼ ct. of side diamonds. The wedding band was customized to go with the shape of the engagement ring and has around ½ ct. of diamonds.
Custom engagement ring made in palladium with a 1.05 ct. salt & pepper center diamond. Wedding band designed to go with the shape of the engagement ring, made with a slightly more irregular feeling. 1.38 ct. Total weight of diamonds.
Mixed metal ring made with polished platinum and textured 18K yellow gold & platinum inlay with around 2/3 ct. of different colors of diamonds. 10.6mm wide.
Three custom stacking rings made in platinum, 14K rose gold, 18K yellow gold and diamonds. We use diamonds and garnet from client’s existing jewelry to create these bands with platinum, river texture, and princess-cut diamonds and gold bubbly rings with satin finishing.
Tapered mixed metal ring custom designed using family diamonds, made with a polished platinum V cutout and 18K yellow gold in a combination of hammer texture and organic grainy texture.
Commission birthstone ring made in 14K white gold with different shades of green tsavorite garnet in domed pave settings.
Commission ring designed using a client provided princess-cut center diamond from her original engagement ring, made in 18K yellow gold with textured barnacles and gray & rose-cut side diamonds.
Custom men’s wedding band design made using the Mokume Gane technique in a combination of 14K rose gold, 22K yellow gold, and palladium with diamonds going all the way around. 6.5mm wide.
Custom designed Mother’s ring made in 18K rose gold with polished 18K yellow gold edges and flower and vine details, made using her kids, grandkids, and husband’s birthstones going all the way around with diamond accents. 6mm wide.
Custom made wedding band designed to fit around our client’s sapphire engagement ring, made with client provided diamonds and sapphires from their original wedding band.
Standard jewelry cases offer uniform sizing and identical molds. But there is a catch. Those identical molds completely ignore the anatomy of the wearer. True bespoke jewelry starts at the jeweler's bench. Heating a crucible of raw alloy takes serious time. Pouring it carefully to forge women's custom wedding bands that withstand heavy daily wear requires immense heat, dirty aprons, and precise tools.
Look at it this way. Flush-setting an heirloom sapphire into a tough palladium ring takes hours of squinting through a loupe. Hand-forged metals simply hold up better. While operating in Arlington, VA, and Washington DC, local artisans see clients walk away from flimsy, hollowed-out bands daily. Because nobody wants a ring that bends when gripping a steering wheel.
Creating custom wedding bands for her involves math, chemistry, and raw force. A CAD design dictates the basic geometry. Human hands then finish the metal. Solder flows where heat leads it. Here is a quick breakdown of why bespoke items win out over factory runs.
The process gets even more detailed here. Designing custom wedding bands for her means balancing delicate aesthetics with structural integrity. Think of milgrain edges pressed in by hand. Or sourcing a deeply flawed but striking salt-and-pepper diamond to sit flush inside rose gold. Headquartered in Alexandria, VA, our approach prioritizes the wearer's specific anatomy and daily habits. Will the setting catch on a sweater? Does the contour perfectly hug a low-profile engagement ring? Those details matter. And they are often overlooked in retail chains.
Stop scrolling through endless catalogs of identical rings. Demand a design that reflects the specific weight and texture of your personal aesthetic. Sit down with the artisans at Dejan Studio Jewelry to build something enduring. It is time to melt down the ordinary and craft your legacy from scratch.
Usually, six to eight weeks. Complex CAD rendering and sourcing specific gemstones require careful, unhurried precision.
Yes. Jewelers frequently remove old diamonds or sapphires to flush-set them into modernized, heavy-duty bands.
Platinum and palladium lead the pack. Both offer dense, resilient structures that resist thinning out over decades.
Custom contours are fabricated to hug any existing shape perfectly. Solder and heat bend the new band into alignment.
All textures soften eventually. However, deeply struck hammered finishes maintain their distinct character far longer than light surface brushing.
We're here to help you begin your custom jewelry journey. Please share your questions in the form, or if you'd like to meet, simply schedule an appointment.
Schedule an Appointment General Request
